Cranchi Eco Trawler 43
Built year: 2019
Length: 13.80 m. Beam: 4.37 m. Draft: 0.90 Mt.
Cabins: owners version 2 cab+ skip
Price: 720,000 Euro (No Vat Inc. )
Specification List
Type: Eco 43 Displacement Hull Trawler
Engine: 2 x Volvo IPS 500 (2x370 hp.) with approx. 100H
Bow thruster.
Electric trim flaps.
LOA: 13.80 mt Beam: 4.37 mt Draft: 0.90 Mt
Cruising speed: 8kn
Cabins: 3 cabins. 1 fwd owners and 2 aft cabins with twin beds.
Showers & Heads:2 electric toilets
Fuel capacity: 1450lt
Water Capacity:540Lt
Hull Displacement
GRP
Deck:Teak on cockpit and on Flybridge floors.
Hull color: Gray
Anchoring
Windlass: Electric
Anchor & Chain: 1x 50mt 10mm Inox chain, 1 x 21 kg Inox anchor
Mooring: 4 Warps & 6 fenders.
Cabins Layout: 3 version cabin. owners front cabin and 2 side Twin guest Cabin.
Salon with table, bar and coffee corner .
Showers: 2 Heads WC: 2 electric Holding Tanks: 2
Galley:
Oven combo with Microwave
Fridge, Freezer
Evaporator
Dishwasher
Ice Machine in External flybridge
Barbeque on Flybridge
Electronics & Navigation systems
Auto Pilot
GPS & Chart Plotters: 2 X Ray Marine plotters
Radar: Ray Marine
Depth & Speed
VHF with Ais
TV & Sound system
Tv antenna
shore power: 220v
Battery Charger: 50Ah
Batteries: 2X 110ah for engines, 2 x 110Ah service
Generator: Onan 11kw
Air conditioning: 48000 Btu
Washer/dryer
Electric Gangway Besenzoni
Aft Hidraulic stern Electric rampa
Safety Equipment:
Bilge pumps: 3 pumps with float and alarm systems.
4 Fire extinguishers + 3 automatic fire extinguishers in Engine room
Additional comments: Sold by the factory in perfect condition and stored at the yard with full service log, after seatrials and demo for clients.
Brokers Disclaimer:
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not part of any contract or offer and are supplied on the understanding that all negotiations shall be through Sofer Yachting who is acting as broker only. The prospective purchaser is recommended to check the particulars and, where appropriate (and at his own expense) to employ a qualified surveyor/engineer to carry out structural and/or mechanical and electrical surveys.